We will cover everything you need to know. How complex fake urine needs to really be to pass a test, and what actually happens to your sample during a test.
If you want to pass a drug test then using fake pee is definitely the best way to do it as long as it’s an unsupervised test. In this complete guide, not only am I going to do synthetic urine reviews of the top brands out there, but I’m also going to tell you everything you need to know to pass.
If you’re in a hurry, you can check out the top two best synthetic urine kits here:
- Sub Solution
- Quick Luck
We will cover everything you need to know. How complex fake urine needs to really be to pass a test, and what actually happens to your sample during a test.
Plus, I’ll tell you about the worst brands Vs the best so you can compare. I will tell you where to find synthetic urine for sale for a good price, and I will give you full instructions and tips for passing a drug test using the best synthetic urine.
When Should You Use Fake Pee To Pass A Drug Test?
There are two types of drug tests, supervised and unsupervised. Supervised drug testing is also referred to as observed testing, although they can be the same thing or slightly different in the level of observation. The exact difference doesn’t really matter. What matters is that you should not use fake pee to pass a supervised/observed drug test. The risk is just too high.
Some people claim you can use a synthetic urine belt to disguise the fact you are submitting a fake sample. Don’t trust this, people get caught that way. If you’re facing a supervised test, it’s far better to do a natural detox, accelerated with Toxin Rid pills, and use a detox drink like Rescue Cleanse from Clear Choice on the day of your test.
Fake pee should be used for an unsupervised drug test. This is where you will be in a completely different room, or at least behind a screen when you submit your sample. That way you can take the sample container out, check the temperature, and pour it into the sample cup at your leisure with no risk.
Here’s What Happens When You Submit Your Sample
When you submit your sample, it goes through up to 4 stages of scrutiny. That may sound concerning, and how can synthetic urine possibly stand up to modern drug testing? Well, it’s actually quite simple. The big labs try to scare you, but the sample doesn’t need to exactly mimic every trait of real urine.
These are the steps it will go through, and the hurdles it has to jump:
- The biggest reason why fake samples fail is that they are submitted outside the correct temperature range. If it’s not between 90°F and 100°F then not only is it not a legal sample but it could not have been submitted by humans. That’s why the correct temperature is the biggest thing that you can affect to pass a drug test with synthetic urine.
- As long as the sample tests within the correct temperature range within two minutes of being submitted, then it will go through to validity tests. This is an automated (if using the digitalized eCup test), or manual dipstick test that looks checks the traits of a legitimate sample:
- Checks the correct specific gravity and pH ranges
- Looks for the correct proportion of creatinine
- May occasionally look for urea and uric acid proportions
- Looks for adulterants (mainly nitrates)
- A human may look at the color and opacity of the sample
- May check for the common footprint of biocide preservatives
- As long as it passes the first two levels of testing, then it will go to an immunoassay (urinalysis – panel drug test). Obviously, it will not test positive because there are no drug metabolites in it.
- If it fails validity checks or the immunoassay, it will go forward to a full gas chromatography–mass spectrometry analysis. This is a level of scrutiny that no fake sample can beat. But it’s incredibly rare that it would get this far because it’s expensive.
How Complex Does Fake Urine Have To Be?
Fake urine doesn’t have to be the same as real urine. In fact, as you’ve seen, to pass the scrutiny it will face, it doesn’t actually have to be that complex.
At a bare minimum, it will have to have the following characteristics though:
- Be within the correct pH and specific gravity range
- Have the correct amount of creatinine in it
- Contains urea and uric acid
- Look like urine
- Be submitted within the correct temperature range
However, those are the bare minimums. That might get you through a basic pre-employment drug test where there’s no genuine scrutiny, but for anything more, a very basic formula will struggle.
As you can see, you are not looking for something that replicates urine. Not even the best synthetic urine brands can replicate real human pee. You are looking for something that ticks the boxes that the drug test looks for.
Here Are The Fake Pree Brands You Should Avoid
Not all brands of fake urine even tick the minimum boxes I’ve just talked about. Some are designed purely as fetish urine and don’t have the correct ingredients, and others aren’t in the correct balances for the ingredients they do have.
As an example, Magnum’synthetic urine is so bad that they didn’t even have uric acid in the formula at all. In the end, they started including of vial of uric acid that you could mix it in yourself! You can find synthetic urine for sale for as low as $19, but trust me, it’s not designed for passing a urine test.
These are the synthetic urine brands that you will read a lot about, but I’m telling you are not complex enough to pass a drug test unless you get incredibly lucky:
- Quick Fix synthetic urine
- All Monkey Whizz Products
- Magnum Synthetic Urine
- U Pass
- Urine Luck
- Ultra Klean Ultra Pure
How To Prepare A Synthetic Urine Kit & Stand The Best Chance Of Passing
Whichever brand of fake urine kit you decide is best to pass a drug test, you’ll have to prepare a sample of fake pee for drug test success.
These are the steps your sample will need to go through to prepare a sample and smuggle in to give you the best chance of passing:
- The very first thing you need to address is the temperature of the sample. Most fake urine products use a heatpad. That means you have to heat the sample with a microwave to give it a head start, and then use the heatpad to try and maintain that temperature until you submit it. It’s a tough balancing act, and very difficult to achieve, which is why it’s the biggest reason why people submitting fake samples fail. Microwave it for about 15 seconds, and watch the temperature strip for about a minute. If you get no reading, do it again, until you get one. Do not overheat it or you still do not get a reading.
- Activate the heatpad and attach it to the warmed sample. Keep checking the temperature often and microwave it a little more if you need to.
- Put on two sets of underwear and firmly tuck the sample between the two pairs in your crotch. That way, it will be hidden when you put on baggy jogging bottoms. Because it’s an unsupervised test, you can’t be intimately searched in that area of your body.
- Just before you go into submitting your sample, check the temperature again. If it’s outside the correct temperature range because it has cooled, then you’ll have to find a hot water source, or heat source, to raise the temperature.
Best Synthetic Urine For Sale: Top Three Synthetic Urine Reviews 2023
To stand the best chance of passing a drug test using fake urine it has to be:
- Complex enough to pass validity testing
- Reliable enough in its heat source to maintain temperature
- Be able to at least visually fool anyone looking at it
Shockingly, that actually narrows it down to just 3 products on the market right now. You can disregard every single fake urine other than these as the best synthetic urine kit you can buy.
This is a highly complex and trusted fake urine brand. For over 20 years it’s been the best synthetic urine product money can buy.
It’s not cheap, costing $85, which is more than double any of the cheap brands. But you get what you pay for.
Sub Solution has the following characteristics:
- Looks, froths, and even smells like human urine
- Perfectly balanced for pH and specific gravity range
- Contains the right amount of creatinine
- Contains a total of 14 chemicals found in urine (including albumin, urea, and uric acid)
- Doesn’t rely on a heatpad
On the downside, Sub Solution is a powder that has to be mixed with filtered water to hydrate it to use. But, as long as you are intending to use it for short-notice drug testing at work, then that isn’t a problem because you will always have preparation time before you go to your appointment.
It doesn’t rely on a heatpad. Sub Solution uses heat activator powder. This stuff is pure genius.
Just mix up the sample and take it along to where you are submitting it. Just before you go in, check the temperature strip. If there’s no reading, tap in a little of the heat activator powder (about one-quarter). Shake it until it dissolves, and watch the temperature strip carefully for about one minute. Keep adding small amounts of the heat activator powder and letting it dissolve until you get a reading on the temperature strip. Get it as close to 100°F as possible, then conceal the sample, and go in and submit it.
As you can see, it will pass validity tests, has the capability of fooling human scrutiny, and gives you complete control over the sample of the temperature. It’s the perfect crime.
Quick Luck is the new product from Clear Choice, which also make Sub Solution. It’s basically Sub Solution that comes premixed as a liquid.
You’ll also get a pair of high-quality heat pads as well. This allows you to raise the temperature in advance, leaving less work for the heat activator powder to do. However, they are completely optional and not needed because of the heat activators’ potency.
So, Quick Luck is an upgrade on Sub Solution for convenience. Other than that, it’s pretty much identical. You’ll pay $15 extra ($100) for this extra convenience, making it the ultimate fake urine out there right now.
Test Clear powdered urine
The best of the budget brands is Test Clear synthetic powdered urine. Made by the same company that makes the very high-quality Toxin Rid pills, its price at $50 puts it between Sub Solution and the budget brands.
But this is not a budget product. It’s a powder-like Sub Solution, so you will need to hydrate it. But it is complex, almost as complex as Sub Solution.
Also, when hydrated, it looks, froths, and smells like urine as well. So this is like Sub Solution lite, and you’ll pay $35 less. But it’s not quite as complex as Sub Solution. For that little bit more insurance, I’d always trade up to Sub Solution if you have the money.
Plus, Test Clear urine is powdered and comes with a heatpad. So you’re not getting that heat activator powder which is worth $30 extra on its own.
The heatpad is good and you get two of them. They are very slim and subtle. They are also sticky on one side, allowing you to stick them around the sample bottle. This insulates the sample, kicks out and even heat, and insures you against one of the heatpads failing.
But, it’s not quite as reliable as the heat activator powder for giving you control. So at $50, it’s a great buy, and for a pre-employment drug test you’re not really bothered about it’s great.
If you’ve got the money, or it’s an important drug test though, I would always trade up to Sub Solution, or pay $100 for Quick Luck if you can.
Synthetic Urine For Drug Test FAQ
What Is The Point Of Synthetic Urine?
Synthetic urine has many uses. It can be used for fetish use. It can be used medically for demonstrations. It can also be used to calibrate and test urine analysis equipment.
But high-quality synthetic urine can also pass a drug test. It’s good enough to get through the initial validity checks, and a full urinalysis (both digital and manual panel drug testing). So the point is it will pass drug test if used correctly.
How long can pee last in a bottle for drug test?
Synthetic urine has a shelf life of at least one year. However, once it’s opened and air gets to it then you have 24 hours at most, even if it’s refrigerated. Because it contains urea and uric acid, it will start to cloud and get a “stringy” look to it after 24 hours at room temperature. Once you’ve opened a sample to the air, then synthetic urine only last a few hours, and is best submitted within five hours of opening.
How to make synthetic urine?
It is possible to make synthetic urine, there are recipes out there. But you will need a lot of specialist ingredients, which you can’t buy in small quantities. Plus you will need sterile mixing equipment. So it’s not cheap to do, and if you don’t get it exactly right then the lab will spot it is fake. It’s far easier to just by high-quality premade synthetic urine online.
Can You Be Identified From Your Pee?
You cannot personally be identified from a urine sample. Although your DNA would be in it, there is no standard drug testing in America that is legally allowed to look for anything more than the composition of the sample in relation to drug testing.
So no, you cannot be identified by your urine. That means you could submit someone else’s urine during a drug test. But that’s hugely problematic for a multitude of reasons.
It’s far simpler and safer to pick some high-quality synthetic urine, submit it within the correct temperature range, and stand a far higher chance of passing.
How long is synthetic urine good for?
Synthetic urine last about one year if it’s not opened. Once it’s open to the air, it will only last for 24 hours even if refrigerated. Because it contains urea and uric acid, several hours of being exposed to the air at room temperature will start to cloud the appearance of the urine. Once open, a fake sample is best heated up and then submitted within five hours or so.
Can DOT drug test detect synthetic urine?
No if it’s a high quality synthetic urine like Sub Solution or Quick Luck.
Which urine drug test is most accurate?
The most reliable urine test are the physician ordered lab tests. Those are the most accurate ways to detect drugs or the use of fake urine.
Does Concentra test for synthetic urine?
No they dont. They will check the temperature of the sample and they will check it for certain chemicals like creatine. That’s the reason only the most complex synthetic urine brands work.
What Is Specimen Validity Testing At LabCorp?
When you hand your sample over, either a lab technician or the eCup digital system will undertake some validity testing.
First, the sample temperature will be checked. It has to be between 90°F and 100°F be legal. If it’s not, the sample is rejected and you will fail the test.
Then, a validity check is done on the sample itself. It will look for the right levels of creatinine, that it’s within the correct specific gravity and pH range, as well as for the presence of adulterants such as nitrates.
How to hide synthetic urine for drug test?
The easiest way to hide synthetic urine to pass a drug test is to wear two pairs of underwear. Tuck it securely between the two pairs, so that it’s close to your skin but not on it. This will keep it secure and warm. Make sure you where baggy jogging bottoms so that no bulge can be seen, which would be especially strange if you are female.
How to keep synthetic urine at the right temperature?
There are two ways to keep fake urine at the right temperature. Firstly, most brands come with a heatpad. This is air activated, and should emit a steady heat within the correct temperature range (around 95°F) to keep it within the right temperature to be a legal sample (between 90°F and 100°F). However, heatpads can fail, and it’s always advisable to keep a flask of hot water with you. Alternatively, Sub Solution and Quick Luck use heat activator powder, which generates heat when you put it into the liquid, it’s a far more controllable and reliable way of keeping the sample within the right temperature range.